dragonlost

Hello. I'm trying to activate the touch screen of my chuwi hi10 table. I am under Ubuntu Mate 18.04.2 LTS with kernel 4.20. Can not compile: ``` sdurand@tabastro:~/toutch/chuwi-dev/drivers/chipone_ts$ make hi10...

By exploring the different issues. I noticed that my problem is exactly the same as for the CANON M6

Looking to see if anyone had successfully piloted an M3 Canon with gphoto2 I found this: https://sourceforge.net/p/gphoto/bugs/1033/ and : ``` #!/bin/bash echo For Canon EOS-M3, version 001 created by Anthony...

[test.txt](https://github.com/gphoto/gphoto2/files/7656045/test.txt) log for 1 pose of 1s (setting on canon : iso 1600, apperture 3.5, mode : bulbe, mode jpeg+raw, mode M).

Do not hesitate to tell me if I can perform other tests on my M3 to help you find the problem.

Hello I have exact same issue on Canon EOS M3 ( firmware 1.1, 1.2.0 and 1.2.1). I can't change the setting and then take a photo. The get-config command works...

interface=wlan0 listen-address=172.24.1.1 blind-interfaces server=8.8.8.8 domain-needed bogus-priv dhcp-range=172.24.1.50,172.24.1.150,12h thanks for help

I have just returned from vacation. I checked ifupdown is well installed.