Anthony Doud
Anthony Doud
Awesome! Too bad I didn't have this for https://github.com/doudar/SS2kConfigApp and https://github.com/doudar/SmartSpin2k . I had to roll my own. https://github.com/doudar/SmartSpin2k/blob/1c120d4c9b40b99ec6b29e01a72cdc3aa2e9b272/src/BLE_Firmware_Update.cpp Just curious, what are your transmission times for a 2mb firmware?...
@Dekto , what firmware version are you running?
I just looked at the QZ log. Please try starting with the resistance at 5 or higher, and let me know if that helps.
I believe I have QZ on my Peloton working correctly now (had to activate a special Bluetooth developer mode). I'll see if I can duplicate this later today.
Also, it shouldn't damage the SS2k. The noise you hear if it hits the end stop is just the motor magnetically slipping. One of the reasons we chose a stepper...
> > had to activate a special Bluetooth developer mode > > > > @doudar what do you mean? "Enable Gabeldorsche"
Neither had I. Neither QZ nor the SS2k config app run correctly on my Peloton tablet without it enabled. Without it enabled, we can see the devices correctly, but cannot...
Unfortunately not, because I don't have QZ on my iPhone and I can't get the QZ Android version to work properly on the Peloton tablet (the only android device I...
Okay - I can look into this. It's probably a very easy fix, I just need to see if there was a reason I removed it.
@cagnulein , I took a look at the code, and as long as a Peloton bike is connected, it *should* be outputting the resistance on 2AD2 bytes 6&7. If a...