mavesp8266

mavesp8266 copied to clipboard

Hello , This is not exactly a issue with the MavEsp firmware . Can someone help me with adding a Ethernet PHY layer and necessary changes in the firmware code...

Amith4504

Strange behavior mavesp on Pixhawk

9

Hi guys, i'm facing a very strange behavior. I'm using a NodeMCU v2 instead of an ESP-01 and it is working quite fine with an Ardupilot at 115200. The strange...

Puav

I can't build it successfully. the error is as following: .pio\build\esp01_1m\firmware.elf section `.text' will not fit in region `iram1_0_seg' the platformio Espressif 8266 platform version is 1.4.0. some tips? thanks

david6096

Config not persisting across reboots with ESP-07

1

Firmware works without any issues on my NodeMCU (ESP12E), but settings are not saved correctly on my ESP-07. My assumption is that the different flash size is the culprit even...

fmckeogh

v1.2.2 and v1.1.1 fails to bootup (Stuck in bootloader ? )

6

Unable to see the pixracer wifi after flashing the firmware v1.2.2 or v1.1.1 . Steps to reproduce 1. Use the hardware: [ESP8266EX](https://www.sparkfun.com/products/13678) along with [USB-TTL convertor](https://www.amazon.com/gp/product/B078W5L8W1/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) 2. Follow https://docs.px4.io/en/telemetry/esp8266_wifi_module.html#flashing-the-esp8266-firmware to...

echoGee

I've noticed that activity on this project has slowed, and I was wondering if you needed some help. Would you consider adding the project to [Code Shelter](https://www.codeshelter.co/)? It's an open...

skorokithakis

Configuring Static IP in Station Modin

1

Hi. Is there a way to configure for static IP in station mode? Thanks in advance.

mzahana

wemos D1

2

hello, i have a prb with wemos D1. the usb to Uart i thinck if mod your code and force serial.swap() in src/mavesp8266_vehicle.cpp and connect my TX and RX to...

feiltom

I have idea for update, ESP32 support... ESP32 module have build in Bluetooth, with button mode can be change easily form WIFI to Bluetooth. Normally using smartphone/tablet when you are...

daskalovst

tested the automatic connection inside QGroundControl. Works perfect in Android and iOS does not work in windows 10. I have to click connect button once i loose connection, and i...

GlidLov