doctordbx
doctordbx
@hamin Let me know how you get on please.
Hi there, I have iMac 18,3 with the same configuration: From ioreg ``` AppleHDATDMAmpMAX98706 0 AppleHDATDMAmpSSM3515 0 AppleHDATDMAmpTAS5758L 0 AppleHDATDMAmpTAS5764L 4 ``` I'm happy to do what you need to...
I surely can. I'll install it today. On Mon, 29 Jun 2020, 03:11 davidjo, wrote: > Can you run High Sierra - eg install on spare SSD drive > >...
OK, I installed High Sierra on my iMac, which was oddly a lot hard than I thought it would be due to issues with different USB controllers and booting from...
Might be best just to send me the execs, it's a pretty bare bones install and just for this exercise. you can email me directly on my username and gmail...
Ah cool. Would be nice to get an idea of how you've wired it up. Are you taking CAN from the OBD plug or from the control socket for the...
> not sure what standby current is on the pi though... Apparently pretty terrible. Found a device called Sleepy Pi... but a bit on the $$ side for what it...
Could probably make something with a relay hooked up to a micro board that can also direct the pi to shutdown and then power off after 30 seconds.
Actually, since I ended up building my own CAN Adapter with an ESP32 and send the can signals out over WiFi through a UDP socket it occurred to me that...
I am using the ESP32 with a CAN Transceiver and sending the CAN bus data out over Wifi. I use Canneloni as the transport for Wifi. https://awesomeopensource.com/project/mguentner/cannelloni Using the ESP32...