dnutt20x6

I don't think so, I've been trying to compile for a Robin Mini for the past few days and it fails every time, across 2 different PCs, with the same...

Odd, I redownloaded Marlin 2.0 and it still won't compile for me.

I confirmed that marlin compiles for the robin mini. So next I need to use the sample configs to build a proper config then? All I got was a blank...

@makerbase-024 Thank you' I've been pulling my hair out all week over this. The screen works now, but touch is nonresponsive.

I did some testing and commenting that line out didn't seem to break anything. I ran across TH3d's firmware for the Kingroon KP3 and it's more or less identical to...

@makerbase-mks Sure, here's the page for their firmware: https://www.th3dstudio.com/knowledgebase/kingroon-kp-3-firmware-marlin-2-0-based/ The source code is provided in the download along with the firmware. and their Github is linked on that page as...

@mattdog01 There was some update to VS Code and some of the editor binaries that happened awhile back, and that seemed to fix my compiling errors. I'd say try using...

@zillarob I'm guessing this wouldn't be too much different for a Robin Mini? I'm not clear on the timer number, or whether I need to remove any resistors, etc, like...

@zillarob OOF, I may wait and buy an ABL kit then, since they seem to work around a lot of these limitations without modding the board too much. I can...

Upon further thought, I figured screw it, I can't think of when I'll actually use the +Z for anything else, so no big loss. I removed the R3 and R9...