dsouza
dsouza
I'm not sure reg-db.txt should be used. I mean, while it correctly specifies the maximum power allowed for a given region, it might be greater than the radio supports. I...
That's not how things work in real life. Most manufacturers use a single hardware design for their devices which are sold globally. The TX power and other regulation constraints (such...
If I am reading correctly, most comments in this discussion are related to eeprom.c and the options to make it read the correct TX power limits for various mt76 devices....
I faced this issue once with an Archer C6 v3.2 (same hardware as the A6 v3). A soft factory reset did not work. I was able to restore the 5Ghz...
@proski, since Archer C6 v3 has a reset button, I did the "hard reset" by long pressing it for a couple of seconds. It might have reset something else other...
> > Done some measurements. > > Two Xiaomi AX3200 routers. > > > > 1. OpenWrt SNAPSHOT r19309 with included mt76 driver. > > 2. OpenWrt SNAPSHOT r19309 with...
> Ok, I am sorry if I am little bit repetitive here but - may you try latest OpenWRt HEAD? I am hoping commit [645eac6](https://github.com/openwrt/mt76/commit/645eac64bece2770ec7b25515df3e30f1385e15d) fixes your issue. It would...
Yep, I did as @eginnc mentioned above (I'm dsouza user in the forum).