dmarc1234

Alert implementation

15

Hello I am working on a project that needs to use the NMEA2000 Alert system on my Raymarine plotter, PGN's 126983 ~ 126988, but I cannot seem find any functionality...

I am experiencing the same issue as #191 reported some time ago. On each failed connection after calling mqtt_client.connect() the heap is decreasing by about 4700~5000 bytes. Was this issue...

Constant dB(A) level even though microphone data changes

1

I am trying to get your standard code working with a ICS43434 microphone connected as follows: #define I2S_WS 22 #define I2S_SCK 23 #define I2S_SD 5 I can see the I2S...

ULP in Eclipse CDT

3

I am trying to get the ulptool working under Eclipse CDT. I have followed the Arduino IDE install procedure placing the relevant files within the CDT tools directory, the ULP...

HTTPs support

6

When will HTTPs be supported as its becoming an issue for some webserver users. There is a ASYNC_TCP_SSL_ENABLED switch supported but as reported the underlying code does not compile if...

LoadProhibited exception in SSL_pending when delivery page from SPIFFS

1

I have an issue where delivering pages results in a LoadProhibited exception on a pretty constant basis, the decoded exception results are as follows: Decoding stack results 0x40193c9d: SSL_pending at...

Hi, I am using your great library to send temperature SET traps to my PC every minute when over a particular threshold and its working well. The problem I have...

Pointer to structure for addReadWriteStringHandler results in SNMP no such object

6

I am trying to point the addReadWriteStringHandler() to a char array within a global structure to allow a GET and SET to be performed on it and I am having...

EFR32MG22 software engineers

1

Hello I am looking for a software engineer to complete a Zigbee 3.0 home automation sensor project using the EFR32MG22 device. I note that you have experience with the SiLabs...