Daniel Mallette

Hm. Correction: Ubuntu 20.04 LTS (I used to have 16.04 LTS, but updated) and the other system is an Astroberry Pi 4. Both behave the same.

@knro : Thank you very much for looking at this issue. In the meantime, in order to have a semi-working setup, I use a workaround where I force a Tracking...

Why has this isdue been closed? It was never adressed.

Thanks for your reply. In order to better understand the code, could you please provide the sources for the information used to select the mount's features below ? The changes...

Telescope and mount: Celestron NexStar SE, paddle is NexStar+. Mount Model is NexStar 6/8 SE Paddle shows firmware HC:NXS 5.35.3177 and MC:5.14 5.14 In KStars, I select Celestron NexStar HS...

Hello and thanks for your reply. The INDI installation and driver have been recompiled. I can change the version of the driver number from 3.6 to 3.7 and the version...

[indi_celestron_gps_13:11:06.log](https://github.com/user-attachments/files/22407320/indi_celestron_gps_13.11.06.log) this is after activating the commened line in celestrondriver.h. [indi_celestron_gps_13:22:06.log](https://github.com/user-attachments/files/22407430/indi_celestron_gps_13.22.06.log) This is with the line commented out, as it originally was.

[Indi_Celestron_Gps_Tracking.zip](https://github.com/user-attachments/files/22414816/Indi_Celestron_Gps_Tracking.zip) My aologies. I left the modifications (described in an earlier message) to enable Sync and Track Mode in celestrongps.cpp. I now have replaced the celestrongps.cpp file with the original...

[indi_celestron_gps_21:22:25.log](https://github.com/user-attachments/files/22454667/indi_celestron_gps_21.22.25.log) Thank you very much. Since I am not sure how to use pull, I downloaded the entire project branch and recompiled. Hoping this is OK. I am attaching the...

Sunday Test with actual stars: With the new code you provided, the original problem persists (tracking stops as soon as i use the remote buttons from the indi control panel...