Cliff

Please look here for v2.4 firmwares. https://github.com/headtracker/HeadTracker/actions?query=branch%3Av2.4x

Rev2 needs to use the development firmware and gui. https://github.com/dlktdr/HeadTracker/actions/runs/10010869506 https://github.com/dlktdr/HeadTracker/actions/runs/9124117598 Bottom of each page is the artifacts(binaries) You can find the most recent ones under actions. To upload the...

> I have just ran into the same issue but dont seem to be able to resolve it with the above solution  > > It is a brand new...

Could you program a basic Arduino test program to it to see if the IMU is actually working on your board or if it's an issue on my end. It...

Hmm yeah didn't detect it in this software either ```[00065693] htmain: Sense_Init failed``` according to that log. * Also I guess I should add some more details to that error...

The one near the xyz is the magnetometer, BMM150. and yeah it sure does look chipped. If it's broken and holding the I2C lines in a low state would cause...

Best of luck. FYI the I2C is easiest to probe here. 

> Hello, I seem to be having the same issue with my IMU, I think the above suggestion will work, but the second link has an "expired" file. Would there...

Not too sure what you mean here? The whole board reboots? On every reboot the red led will flash, does this happen?

Need more details