Bay

Ah I see! Thanks for the response Rob, sry for the bother I'm not too experienced with C/C++. Initially thought libraries would be scoped like NPM packages 😅 I will...

Existing implementations as reference. https://github.com/DrEricEbert/Slic3r_NonPlanar_Slicing https://github.com/teachingtechYT/PrusaSlicer https://github.com/teachingtechYT/PrusaSlicer/releases/

My bad must've missed that! Den fre. 19. apr. 2024 kl. 20.46 skrev TheYang ***@***.***>: > Existing implementations as reference. > https://github.com/DrEricEbert/Slic3r_NonPlanar_Slicing > https://github.com/teachingtechYT/PrusaSlicer > https://github.com/teachingtechYT/PrusaSlicer/releases/ > > As well...

This fork has Vue 3 support https://github.com/jonasclement/vue-accessible-select

I provided ulab with a test print. I will provide the same file along with a 3MF with the settings used here so people can troubleshoot. The files come with...

> Same issues here - sometimes CoreOne Loses Connection to PrusaConnect… Issue exists on every printer. CPU gets overloaded and doesn't have enough cycles to do networking as kinematics take...

> > This is not an airport. You don't have to announce your departure. Good luck with your new machine. > > did you think of that yourself, or is...

It might be. If your printer is connected via wifi that connection could just be unstable. I haven't experienced any issues with connect whilst not printing. On Sun, May 25,...

The issue in the two comments above seem unrelated to this one... On Wed, May 28, 2025 at 15:12 koombot ***@***.***> wrote: > *koombot* left a comment (prusa3d/Prusa-Firmware-Buddy#4636) > >...

If this is a "CPU running out of cycles issue" as we theorize this issue might have the same root cause as this one https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/4573#issuecomment-2925280482 given the comments of Prusa...