dimaregabriele

hello, were you able to configure homeassistant ? you can help me ? @donpablos @omenukas

can you help me ? I installed the software on the CZ-TAW1. Everything seems ok, (steady green light, steady white light) but on home assistant I can't configure MQTT I...

A pendrive empty ?

@MiG-41  

OK I try. What guide can I follow step by step? @MiG-41

@MiG-41 do i just have to upload the two files on the usb stick? then it plugs into the CZ-TAW1b and I press the 3 buttons at the same time...

how should i rename the file? okay config.example ? what format should it have? @MiG-41 `Readonly=true Device="/dev/ttyUSB0" Loghex=true ReadInterval=1 Aquarea2mqttCompatible=false Aquarea2mqttPumpID="" Mqtt_topic_base="panasonic_heat_pump/main" Mqtt_set_base="panasonic_heat_pump/commands" ForceRefreshTime=300 MqttServer="192.168.1.37" MqttPort="1883" MqttLogin="aa" MqttPass="aa" SleepAfterCommand=1 MqttClientID="GoHeishaMon-pub"...

I connected via web to the ip address of the device and entered openwrt. now what should I do to view the data on home assistant? @MiG-41

i put the heishamon.yaml file, but i see all the sensors as "unknown" status. How can I verify that MQTT is working? In the configuration file I put MqttServer="192.168.1.37", where...

this is what i see on mqtt explorer. @MiG-41