Patrik Bachan

Did it help? Is this issue solved?

At first you have to find out what MCU does that charger use. If it is supported by cheali (AVR or Nuvoton ARM) then you can think about flashing cheali....

My Turnigy 400W X2 is running 2.01 20170311 and I have no problem to modify Vc and Ic for battery type Unkn. Try [more recent version 2.01](https://github.com/stawel/cheali-charger/tree/master/hex/unstable).

Can you describe it more? You wan to auto-detect cell count when configuring new battery?

Hi @alvesjc, >I'll also see if it's possible to mod the charger and bring the voltage probs close to the battery independtly of the charging leads. This way the high...

Yeah, I meant in cheali charger FW. Difference in voltage measured on charging leads and balancer is expected. However it should almost vanish with decreasing current during discharging. (if it...

>The diferences was huge at start, but now all match my multimeter. Charger flashed with cheali must be fully (re)calibrated. Default calibration is rough. I suggest to calibrate voltage with...

Thanks for photos and pinout. Discharge power is limited by charger capability to dissipate such amount of power (and still maintain sane temperature) rather than transistor itself. If you want...

> Yes, right now the fet + current sense resistors are the only ones dissipating power, at least is what i'm perceiving from the schematics. Yes, all power should be...

In [Hardware section](https://github.com/stawel/cheali-charger#hardware): **WARNING**: You can get two chargers with the same name but different CPUs even if you buy from the same seller. Only chargers with a atmega32 or...