Patrik Bachan

Hi, AFAIK trickle charging is charging by short pulses. This is generally not easy to accomplish, because these chargers has large capacities on their outputs.

In cheali philosophy, you should have separate configurations for each battery or combination, but your solution works too. Parallel charging is not safest thing, but I guess you know the...

At this moment, cycling is limited to 5 cycles, because results from each cycle are saved for review (charge in/out). Space for all of them has to be reserved at...

Hi, do you have logs from flashing? - It is good idea to lower programmer frequency ( `-D 100` for 10kHz clock), otherwise improper wiring may cause glitches in transfer....

Hi, Isn't plot config matter of LogView? You should be able to change plot properties as much as you want (and LogView allows). Also, please describe what behavior do you...

FW only transmits values. It's up to other SW how it presents those values. There is nothing about plots in [ini file](https://github.com/stawel/cheali-charger/blob/master/utils/LogView/ChealiCharger_6cell_1.0.ini). I am not using LogView so, I can't...

Hi @D4nko0, your charger is matching B6 pinout at least for LCD and [layout looks very similar](https://raw.githubusercontent.com/stawel/cheali-charger/master/docs/imaxB6/imaxB6-original-front.jpg). What frequency is that ctrystal? (oval metal package) @stawel did you try/support any...

@D4nko0 Enjoy new functionality :) @stawel I tested ATmega8A on 24MHz and it worked ok, but I would not expect device running out of specs in commercial device. > but...

According to images, there is additional IC in top right corner, probably op amp. It is usually differential amplifier for all bottom 2 balancer channels. (usually 2 lowest cells have...

Hi @sklepa, which FW file did you flash (full name)? What resistance do you measure between pin0 and GND?