Daniel Heckl

> > And crucially - when running, the volume control works perfectly! Happy days 👍 > For me, it only switches between mute (0) and 100. If I select a...

I try to get eth2ap running with WT32-ETH01, but I get "WiFi send packet failed: 12309" error. I already tried to set higher timeouts and queue size, but it didn't...

I followed the troubleshooting steps and increased sending timeout as well queue size. Both have not changed anything. Btw, the mentioned variable FLOW_CONTROL_WIFI_SEND_DELAY_MS isn't existing any more, it is now...

eth2ap still not working on my side, but tried https://github.com/espressif/esp-idf/tree/release/v5.2/examples/network/bridge and it works perfectly.

Is it possible to get the requirements from @pedily done and the PR merged?

Yes and the device responds to ping.

I added the logger configuration and was able to reproduce the issue. However, the logs still only show "websockets.exceptions.ConnectionClosedError: sent 1011 (internal error) keepalive ping timeout; no close frame received."....

The issue occurs when sending commands directly through Home Assistant as well. My earlier tests were only conducted using the HomeKit Bridge. Your proposed fix makes sense, and I believe...

While testing to identify a pattern, I was able to reproduce the "network initialization" screen appearing with the StreamMagic app. I could consistently reproduce the issue by waking the device...

It works as expected, thank you very much. After about 30 seconds, the status of the device was updated, and the commands were executed again.