Devon Davis

Looks like a useful feature, will need test it out. Can you add the files for command documentation. Thanks.

What are the parameters for the command?  Is it the same as quad_gantry_level?  The file would be Config_Reference.md with quadbedlevel added.Sent from my Galaxy -------- Original message --------From: Phil1988 ***@***.***>...

Tried the command. got the following error. Used the same config as quad_gantry_level. Assume I did something bad in the config but not sure. Send: quad_bed_level Recv: // probe at...

The bed_corners and gantry_corners are very different. Gantry is only z and z2 which should cover all needed information. Bed_corners is z, z1, z2, z3. If there are cases where...