Florian Bauer

We had a similar Issue and was able to fix it with your hint with the CONN_LIMIT. We had around 100 Nodes as well an experienced several outages before and...

I think it was just coincidence that our network was working again. https://github.com/weaveworks/weave/blob/34de0b10a69c2fa11f2314bfe0e449f739a96cd8/prog/weave-kube/launch.sh#L44 The default of CONN_LIMIT is 200 so i think to take effect it has to be increased...

We increased to 400 and added also the MTU so far we have no issues and the weave status connections shows the new MTU with fastdp, we will see if...

Same with 400 i noticed that alle peer Connections are fall back to sleeve when the network crashed. I think we will increase the node size as a workaround and...

We ran also in that issue and would be happy when someone has the time to contribute the feature. Meanwhile we are using Pods with a low priority (-1) which...

Yes i pass it via additionalResources.

I do not pass any additional Labels i think the labels are passed via helm by default but i am not 100% Sure. So since the ClickhouseInstalltion is part of...

Hey, do you have any new information i see that this is implemented for nodeRole but not for mastersRole. The workaround is good so far!

We currently have the same issue. I just activated the audit logs at the eks cluster control plane but i cant see any event which is related to the webhook....

It was some kind of API Problem on the master nodes. We fixed it by updating the EKS Control Plane to the next Version. The Support recommended to open a...