defalutz

Yeah, that was my thought too. But since there were many with this issue, i will give etching away a try at least One time. Is it enough to cut...

Noticed a incredibly weird behaviour. The PCB´s i checked and deemed OK suddenly has the error i described above, which kind of sucks because it´s 9 that i almost have...

I´m testing them on an anti-static surface, but i suppose anything can be possible. Everyone is from the same batch, but i don´t have the know-how or money to make...

Oh, forgot to mention; now the unit that i had the initial problem with dont display anything on the OLED, even if i install the new firmware via xloader, it´s...

The issue is weird; i have a short on the resistor arrrays, on the third pair from the top, ics3 and ics7. The only pair that´s supposed to be connected...

Hey, i have Some peering issues, this One just won't start peeering what ever i do. I have reflowed as much as felt reaśonable at the moment. Cables are fine...

Yes, i noticed that myself when i posted, i saw in eagle that two traces from the first midi port go to the right and i'll check if One of...

Ok, got it. Unfortunately it didnt make a difference. Back to experimenting. Peering, Short break, peering and so on. I'll check in some of the other ideas in the thread...

Hey guys; i have actually found out some interesting things. On the main midi ports, peering just restarts all the time. On the secondary midi ports, if i set them...

No, dont worry. I appreciate the input. And it´s true. The issues you describe is because of 1. stress, a lot to do and too little time, so unfortunately in...