Robert

Speed Mode lock: Press and hold the VS indicator in the status bar and it will turn red.

Regarding SAM and SSB, maybe github.com/gnuradio/gnuradio/tree/master/gr-uhd/apps/hf_explorer might be of help. For additional modes, see github.com/EliasOenal/multimon-ng I cannot judge if these are easily portable to Java, though... What do you think?

Thanks Dennis! I'd be happy to do some testing for you - just let me know! Best regards, Robert

Alternatively, you might want to consider using the SoapySDR library to easily incorporate all different kinds of RF frontends / dongles. Details can be found at https://github.com/pothosware/SoapySDR/wiki . Driver modules...

Sorry, I don't. Just make sure there is isolating tape below the center portion of the conductive tape. In addition, keep in mind that your very first GPS fix can...

Hi Joe, I just checked your issues on my unit (GC-01, also with Geehy processor). I could not reproduce any of them. Battery life on my unit is close to...

Current draw on my GC-01 with RadPro 2.0rc4 is around 29 mA with sleeping display, a significant improvement over the stock firmware. Custom HV profile makes quite a difference :)

Hi Joe, I am measuring the voltage across the geiger tube with a Fluke 80K-40 HV probe. Btw, I was able to load the original firmware via ST-Link, even though...

Joe, would you be willing to share your bootloader as per Gissio's instructions? https://github.com/Gissio/radpro/discussions/59 Apparently, there are a number of different versions out there in the wild. Thanks in advance,...

I'm not 100% sure if the instructions apply. Let's see what Gissio thinks :)