David Buezas
David Buezas
I see. The layer shifts when changing frequency, shaper or smoothing won't be visible in the simulator. FTMotion doesn't loose track of current position, it kind of travels back or...
E Smoothing in particularly is something i want to change on the fly if the extruder doesn't sound great with a particular filament.
Another option would be to update delays incrementally
Thinking if i should close this pr since it will require more careful thought
Right, I think what you did is great, but my naive calls to synchronize don't fix what I intended to fix
ups deleted branch by accident
With such a long extrusion, the accel/decel phases should be irrelevant, and therefore the linear advance part shouldn't be significant. The only other source I see is the fact that...
It could also be e-synch. Can you confirm none of your input shaping frequencies are below the smallest one set at build time (i.e the default IS frequencies)?
I assume with the same results? Did you try disabling e_synch?
I finally got around testing it myself, the issue is not affecting my machine. I used the same speeds as you. There's only underextrussion at 39mm/s, which is anyway an...