davthomaspilot
davthomaspilot
Will the script it work with this I2S DAC?
It seems pianobar starts up at whatever volume it was set to when the client disconnected. Is there a way to define a fixed volume instead? Typically, someone will turn...
One of the gadgets I've developed uses a dongle to communicate with a wireless remote. It works when I use x11vnc, but not when I use the systemd services as...
I get this message when I tried to connect to either 5901 or 5902 using a tightvnc client. `Connection has been gracefully closed` ``` The services are running ok ●...
my SD card got corrupted, so I have to start over. Fresh Bullseye install, following the instructions here: https://github.com/rstrouse/nodejs-poolController-dashPanel/wiki/nodejs-poolController-dashPanel-setup-and-configuration-on-a-Raspberry-Pi-for-the-novice Getting these messages: Error triggering nixie schedules: Cannot read properties of...
I tried the example test_pcb.kicad_pcb and everything pretty much worked. But when I tried it on my pcb, I got a warning, no errors, and no output: pcbmodelgen -p meander.kicad_pcb...
I'm considering implementing a frequency scan algorithm that requires precise control of when SPI writes to change frequencies are done. If the frequency change is not done quickly enough, a...
Or, better yet, a way to "pause" the accumulation of timestamped edges that are being accumulated in the circular buffer? I'm using serial read to get data from an RF...
Not really an issue, but I don't know where to ask these questions... I'm doing an RPI gadget Preferably with an RPI Zero W for smallest size and low power....
Everything was working great until I installed an Apache server and phpmyadmin. Now, after connecting to the wifi hotspot and pointing my browser to 192.168.42.1, I get phpmyadmin, not the...