davidrattvik

        

attached below is a protocol dump made via visual studio code. it should simplify the process i hope. i also sniffed the receiver in an attempt to see if there...

Thanks for the feedback. Tonight i'll try and get all the information that you require. I thought that a couple of data bursts would be enough since we are talking...

Also yes. You are correct pascallanger. As I remember I used different transmitters.

i don´t know if i will find the time to do all that you asked of me this weekend but i managed to connect each of my 4 TX´s to...

[logic1 analys start and bind.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/13327506/logic1.analys.start.and.bind.zip)

Great! Do you still want me to perform the airdumps as well? If you could guide me towards a site where i can learn to change the 5byte to 4...

Ok. I'll give it a go later tonight. I assume that it just needs to stand idle during the sampling. Also something that might be interresting is that button 3...

[logic analys 100s to 500s.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/13329018/logic.analys.100s.to.500s.zip) the program limits me to a maximum of approximately 500 seconds. The analyzer is limited to this at 2MS/s. The program also limits me from...

i managed to sample 1800 seconds. the file is too large to upload to this chat.