davidk88

Erase granularity not set correctly on non-uniform flash

1

Hello, I'm using S25FL127S which does not support uniform 4k erase. Library correctly reports via SFDP that flash chip does not supports uniform 4k erase, but it sets `erase_gran` and...

Fixes #55

Pulse to low when pin mode set to OUTPUT_OPEN_DRAIN

5

### Board ESP32-S3 WROOM-1 M0N16R8 ### Device Description AI-S3 devkit ### Hardware Configuration none ### Version v2.0.14 ### IDE Name PlatformIO ### Operating System Windows 10 ### Flash frequency 40...

Empty hostname and ip in event

2

Hello, I have Archer AX53 V2 and many times I get empty hostname and IP 0.0.0.0 in tplink_router_device_online event. MAC is available. - Router Hardware Version: AX53 V2 - Router...

Client disconnection from server not detected

20

Hello, I'm would to update library to new refactored version. I tried version 2.2.3 and If client is not cleanly disconnected from BLE server (goes out of range), then the...