Dave Cutting

@soulsbysynths you said you are using windows. I had to add an extra routine into BOSSA by "double tapping" the serial port, by opening and closing it twice within 100ms...

And just to be clear, the CS would still be compatible with stock AT firmware. Additional commands would be extras that could be discovered by the CS using a "discover"...

Yeah, so just to be clear, this is an extension of the AT firmware. We would basically be adding extra AT commands for things like taking care of the web...

I would add: 3. Layout bus pins 4. DCC Accessory decoder pins

I would add: 3. Layout bus pins

> You can increase the security by generating the password from the chip ID of the Arduino. The password will be unique and can't be used anywhere else only on...

And in addition, we can throw an ATECC608A crypto chip at the problem for certificates and whatever. ESP32-WROOM32-SE has a built in chip and there's libraries for using it in...

Make sure that you also include: 5. Turnouts on the accessory buses

Also, TPL needs to go in and set all of the DCC/accessory bus turnouts at startup instead of assuming anything. Better yet, set the turnouts at the beginning of every...

This is something that LCC takes care of. Two of the wires on the bus carry a replica of the DCC signal at exactly 12 volts, and boosters can read...