davetheghost

keep an eye on your altitude in telemetry -- was doing some testing and it took off vertically _twice_ -- altitude was 0 when i got it back under control...

I should add, i keep a piece of foam over the barometer on my FC to reduce abrupt pressure changes from things like wind, and vortexes caused by the props....

considering this for a Zorro -- Lol. We'll see If I may ask, what LCD did you use, bearing which controller, and interface to your TX?

recently had a fly away that displayed this same behavior on first flight after flashing iNav 7rc1 -- and currently I'll occasionally hear my TX say sensor lost, even with...

that, I don't recall, however, i have made it a practice to erase flash on every FW upgrade -- though, it may have been unchecked since I hadn't used the...

> Can you please test the telemetry behavior with this build here: [https://1drv.ms/f/s!Ar6QsGgoXRgqyPk8iOYA_eGtgz0T-w?e=A4mIfl](https://1drv.ms/f/s!Ar6QsGgoXRgqyPk8iOYA_eGtgz0T-w?e=A4mIfl&fbclid=IwAR1wfDEnRCOGmnGn83EECn7Mawn4Xh03kYN5ZfxpWNwDbhjQ-icaKX3tmTc) > > there was a telemetry related change since RC1, maybe that changes something, so we don't...

Valid point -- however -- if another fly away happens, and I cannot find/track it -- I'd be out another $300, and would likely sell the remaining RC stuff I...

> But as you have valid safety concerns, here is the branch, you can compile it yourself directly from GitHub alternatively: https://github.com/iNavFlight/inav/tree/release_7.1.0 > > regarding the Flyaway. Make sure your...

I mean, I didn't have telemetry on the fly away -- a bunch of sensor lost announcements, no updated GPS coordinates, only TX/RX Quality and RSS, for approx 12 minutes,...