visonic

visonic copied to clipboard

Connection error

20

I have more and more often the problem that after an reboot of HA the powermax pro not can be found in HA (Integration Suspended - No data from the...

phoenix-blue

Wrong date and time format (FR Powermaster33 panel)

11

Hello, I tried today the service to export the event log. I could generate the csv file however something is wrong with the time and date format. Is there some...

domtik

Powermax+ panel does not send "zone open" status

2

Hello, Whenever I have a door open, I am not able to arm the alarm. The Powermax+ panel shows a "zone open" on its display. Is it correct that this...

rhannink

Triggering Fire Alarm State from HA - Possible Feature Request

1

Hello My Visonic smoke detector recently gave up on me. (It permantly comes up with "Clean Me" on the panel despite having cleaned it). I have looked to see if...

anthonywalker75

Support for wireless siren Device S00

5

I have a wireless siren with a Powermax Pro panel, connected in Powerlink mode. I can see "Devices: PGM,X01,X02,X08,S00" So I think S00 should be the siren. Is it possible...

Fabio72

Visonic integration trigger arming is only working for armed_away, not for armed_home

6

Hello, I am using your great integration with a Powermax+ panel. everything works fine, only one automation which triggers when the panel is arming. When I switch to **armed_away**, it...

rhannink

Warning: Valid 4 digit pin not found

7

Hi Not entirely sure when this error started, but it was 1 or 2 releases ago. The device is a powermaster-33 The configuration is configured with the "Arm without User...

martin-tastensen

Merge request - M5Stack ESP32 Ethernet Unit with PoE

7

Thank you for this amazing project. I have managed to get this working on a [M5Stack ESP32 Ethernet Unit with PoE](https://thepihut.com/products/m5stack-esp32-ethernet-unit-with-poe) based another awesome [project](https://github.com/DrJohnM61/poesp32-esphome). This gives people the option...

rjpearce

communication Error

3

Hi, After technician visit the panel announce a communication error. It looks like the phone connection (because it stopped alerting like temper alert) In addition the integration cannot connect to...

de-Bat

powermaster 10 - cannot get a connection via powerlink 3.1

2

hello Davesmeghead i have a powermaster 10 and i cannot get a connection via powerlink 3.1. is it supported? i enter the ip address of the powerlink device provided by...

apfi23120616