Daniel González Cabanelas

Hi @digitalentropy > 1. The readme and script itself seem to keep making reference to a "readflash" command that does not seem to exist within the bootloader nor does it...

@Ansuel, it's for keeping V4 support available. In some devices like NAS, if OpenWrt is installed for replacing the OEM firmware, which previously was managing a hard drive with partitions...

I tested the patch on BCM6358 (HG556a) and BCM6368 (VH4032N). It works ok, no errors or apparent issues. BTW I had to delete the documentation patch because it didn't apply...

Not sure, can you paste an example of the output returned by your command?

Ok, I see, your board isn't using **CFE** but **bldr** instead. Then the rt63365tool.py should work https://github.com/danitool/bootloader-dump-tools/blob/master/rt63365tool.py However I don't see any command available for dumping the NAND flash in...

The output of _asp_flash read_ is probably more similar to the script used by the realtek rtl8186 bootloader: https://github.com/danitool/bootloader-dump-tools/blob/master/rtl8186tool.py I think a new script with minor modifications should be created...