Daniel Nilsson

Definitely sounds like something is wrong because that is not expected behaviour. If there is some problem with the reading of you speed sensor that could explain it, one thing...

For anyone having this problem, please try 1.2.0 and let me know if it works or if the issue is still present.

Seems like a reasonable change, thanks!

Looks like this was introduced with the late changes in 1.4.0, was not intended, I pushes a fix to master, feedback is welcome. Will release a patch if good.

No idea. I think there is one other guy on a BBS02 who had similar issue too along with a lot of other issues. Haven't seen a this on my...

Alright, definitely sounds like a firmware issue then. Was anyone of you running 1.2? Was the issue present there too or is it new in 1.3?

@Gonespa Probably not related to this issue unless others also have their current set that high. It's been reported before that it's not possible to set current above 25A for...

I see, yes you are probably better off with the original firmware. These issues are not likely to be fixes as I don't have a bbs02 and are not doing...

@Larswagner1987 Thanks but I have a BBS02 controller and firmware but diagnosing things that only occurs while riding on high power is hard with a controller on my desk. @silenec...

Ye maybe, I was thinking along these lines too as there is actually an error code reported from NEC MCU on BBS02 described here https://github.com/danielnilsson9/bbs-fw/wiki/NEC-Motor-Control-Protocol which I guessed was an...