Daniel Krebs

Thanks for working on this bug and finding a solution! I understand that the current approach does not entirely solve the underlying issue but that it should already provide a...

> Does that mean you have managed to verify that the patch solves the issue you have? Unfortunately no. Is there a build of the TSDB extension based on this...

Well at least the error messages change. In the following, I'm using current master and SLAC460S. ```bash $ sudo mspdebug tilib --allow-fw-update ... Using new (SLAC460L+) API MSP430_GetNumberOfUsbIfs MSP430_GetNameOfUsbIf Found...

I finally got hold of [slac460r.zip](http://distcache.FreeBSD.org/ports-distfiles/msp430-debug-stack-3.8.0.1/slac460r.zip) which is non-trivial thanks to TI release policy, and it works now. So I can say that `S` definitely breaks mspdebug for TI Launchpad...

I just ran into a similar issue with our own code that behaves differently if `obj` is set in `get_fields()` and I can confirm that this also fixes my issue...

@daniyalzade Just a friendly reminder :slightly_smiling_face: Would be so great if this fix could get merged and a new release published.

@mkindahl I've deployed the new 2.8.1 release a couple of days ago and our bug seems to be solved. Thanks a bunch!

I don't currently have a debugger to test again, so I'm afraid I cannot help much. But "all zeroes" sounds like there might be a cabling problem. Or the Rpi...

Furthermore there has been further progress on the OpenOCD side on the aarch64 support, most notably by Matthias Wählisch, but I'm not entirely sure if all his patches have already...

Which toolchain on which system are you using? Looks like there is something wrong with it. As a quickfix you can add `-L/lib/gcc/aarch64-linux-gnu/6.1.1/include/` to `CFLAGS` in the Makefile.