Daniel Golle

As the device shares almost everything with an existing device I have put all the common part into a dtsi file used by both devices now. Please check it still...

> Would this enable all radios on the same band or just one? It would enable both radios in the 5 GHz band. If the channels available on each radio...

@aparcar fixed your comments, please re-review

Introduced locking to `board_detect` so now it's safe to be called multiple times and we no longer need to `sleep` loop-poll for `/etc/board.json` to appear. @FreifunkUFO Can you maybe help...

@s-2 would be nice if you can give those devices a re-spin based on this tree and instead of adding [target/linux/ath79/generic/base-files/etc/uci-defaults/50_wifi_defaults.sh](https://github.com/s-2/openwrt/commit/0774047c9c35295f51b8f519e69e4579d36cfe76#diff-941e1e763af70a0d8d05d5758688b065b53992e4dc12e73f569074387e886b23) add the boards to [target/linux/ath79/generic/base-files/etc/board.d/02_network](https://github.com/openwrt/openwrt/pull/4777/commits/6f6523b6bd2494e0b1cae3c73112b24739fb9211#diff-2c2196467a672d7134430df95f7da385b5dadab6c2051d1e955176686e8a4245) by using `ucidef_set_wireless $ssid...

It's true that failsafe mode becomes useless (unless you got the serial console connected) on such devices. And as the whole point of failsafe mode is to run early, before...

> By the way, regarding the available flash memory, I was wondering which packages could safely be dropped for non-ethernet devices. But most of this seems to be built into...

@frank-w Shouldn't this be fixed in upstream Kernel DTS? The order of the trip point types doesn't make much sense as @VA1DER correctly stated...

@VA1DER Can you please post a patch doing both, swapping `active` and `passive` trip-points and if needed also lifting the trip points of both a bit? Ideally you send it...

> It is best if stock u-boot can be replaced like Linksys E8450 Should be easily possible, just pick the right combination for storage and DRAM and check ARM Trusted...