Daniel Golle

If you think there is an actual 2.5G PHY maybe show the back side of the board (because on the front side I don't see any PHY) and scan the...

I'd prefer the mux to be done via upstream backports of Maxime's upcoming series which should land soon. The downstream hack to have the mux support added into the ethernet...

@frank-w we **do** need variants of U-Boot because - U-Boot on SD card has to offer installation to SPI-NAND - U-Boot on SPI-NAND has to offer installation to eMMC -...

Getting `drv_tapi` to compile was not hard: https://github.com/dangowrt/openwrt/commit/cccf08e8e2903a10815c114ac1d62272d2a56927 However, there are still some other problems: ``` [ 0.569899] lantiq,vmmc 1f107000.vmmc: reserved 1MB at 0x(ptrval) [ 60.459491] rcu: INFO: rcu_sched detected...

> Well, I have to say that I really hate all these lantiq components regarding "voice". I tried adding `return 1` as first line in the probe function of vmmc...

I got arcadyan,vgv7510kw22-nor ("o2 Box 6431") sitting on my desk with serial console attached at the moment. Edit: confirming that unconditionally jumping to `out_reenable` in `arch/mips/kernel/vpe-mt.c` also fixes the hang...

@kochstefan Any ideas maybe what could be wrong with non-Linux usage of that VPE causing boot to get stuck...?

Confirming that now everything is fine, including telephony features (I've tested incoming and outgoing calls, both audio and signalling work as expected).

> One module does not build on kernel 6.6 (kmod-ltq-adsl). On which subtarget? Because for xrx200 it does build for me (`ltq_atm_vr9.ko` exists), I just can't test it, nothing but...

Did you take into account that we *are* using the 2nd VPE to run Lantiq telephony RTOS on it and enjoy VoIP functionality on some devices.