Doug Mercer

Hi: Your error on line 319: Traceback (most recent call last): File "alice-desktop-1.3.pyw", line 319, in root.createcommand('::tk::mac::Quit', Bcloseexit) NameError: name 'Bcloseexit' is not defined Is part of an untested (because...

Hi: Your error on line 319: Traceback (most recent call last): File "alice-desktop-1.3.pyw", line 319, in root.createcommand('::tk::mac::Quit', Bcloseexit) NameError: name 'Bcloseexit' is not defined Is part of an untested (because...

From the research I've been able to do on line and with absolutely no direct Mac experience, all I've been able to gather is that OSX by default includes a...

First I have a couple of background questions. First, when did you purchase the ALM1000 board and from who? If it was recently and from an authorized ADI distributor then...

OK, when you plug the board in to a Windows computer what if anything appears in the Device Manager? With the LED not lighting up, the board is hope fully...

OK, If you can force the board in to a state that appears as SAMBA in the device manager then BOSSA should see it at the COM port listed in...

Are you using an external USB hub? Try connecting directly to a USB port on the computer itself.

Good idea. Or even a re-boot. I've never had any issues with BOSSA.

This is normal behavior. The ADALM1000 and the supporting library libsmu support two operating modes. We refer to these two modes as discontinuous and continuous. You control which mode ALICE...

Hi: This error is generated by the tk interface (tkinter) in your particular version of Python3.x. Since this is a Python issue there is nothing I can do inside ALICE...