Battery-Emulator

Battery-Emulator copied to clipboard

Add support for PSA/STELLANTIS e-CMP batteries (Peugeot/Opel/Jeep etc) - Help needed

4

Hi there, I have a 2021 Peugeot e-208 100kW and I would like to help the adoption of this platform's battery that is becoming increasingly common in Europe. How can...

albertofralbe

Events aren't synced when SERIAL_LINK is used

1

When `SERIAL_LINK_RECEIVER` or `SERIAL_LINK_TRANSMITTER` is used, events aren't synced between the devices. Events should sync between the two devices.

obbardc

### What This PR adds basic support for MEB platform

dalathegreat

### What This PR implements voltage limits for each EGMP battery. It also raises the polling speed from 500ms -> 200ms , and cleans up some unused codeblocks ### Why...

dalathegreat

### What That feaute will enable SOFAR users use modbus protocol to communicate Battery Emulator with inverter ### Why Perfect mix for single Lilygo use. No CAN conflicts. RS485 goes...

pazdzierzz

### What This PR implements a new event, incase the Solax inverter does not send any CAN data, we raise an event. ### Why To guide the user towards troubleshooting...

dalathegreat

### Expected Behavior Remaining battery capacity sent to inverter is accurate to the remaining capacity when taking consideration of any max /min scaling applied to SoC ### Actual Behavior Remaining...

bubble07

Currently the iPace battery contactors do not close and we had to control the contactor coils manually with the Battery-Emulator and `CONTACTOR_CONTROL` setting, which is fine in the short term...

obbardc

### WIP, testing ongoing

dalathegreat

BYD Atto 3: Add way to use SOC% sent by battery

1

### What This PR adds a configurable option to use SOC% sent by battery ### Why When Atto 3 packs are crashed hard, they lock themselves and stop updating SOC%....

dalathegreat