Christian Herzog
Christian Herzog
Hi Martin, > Hi again. Thanks for looking into the waterjet cutting. It looks like it's not really a good option - if you need to use a CNC to...
*bling* is all fine and dandy, but unless I find a somewhat cheaper way to source FR4 or CF for a printer I need about as bad as a hole...
> OK, I'll presume you will be using ABS, and cutting with a waterjet. uhm actually I was talking about ABS printed panels :) if going the waterjet route (which...
I did some more research. With the 3018 CNC I recently bought it *should* be possible to mill CF sheets, and those who tried got pretty decent results. So I...
in `Left_Face assembly`, what does `4. Attach the wires to the switch and bolt the Switch_Shroud to the left face.` mean? What switch?
I'll have to experiment - I'm still very new to all this CAM stuff. The Y extender is plan B
plan B it is. EUR 40 is not worth flipping anything
> I've created a calibration piece at https://github.com/martinbudden/BabyCube/blob/main/cadquery/calibration/DogboneTolerance_CNC.step > > The dogbones have different tolerances on the top, bottom, left, and right sides. The idea is to CNC two of...
ok back from vacation. I cut two calibration parts from plywood and checked tolerances. The best fit is the following:  slides in nicely and has virtually no play.
> Hope you had a good holiday. I did indeed! thanks. > That fit is bottom side to bottom side of the test piece. I've just check the code, and...