André Luiz Cúrcio
André Luiz Cúrcio
Will there be no more updates?
Were you able to use this card? I bought the same one and did all the soldering points but it doesn't generate an image on the N64 =[
Updating, I was able to run Homebre as Testrom and a cell phone game converted to UF2, but the Nintendo 64 games don't start at all. I've checked pin by...
> > Updating, I was able to run Homebre as Testrom and a cell phone game converted to UF2, but the Nintendo 64 games don't start at all. I've checked...
I managed to solve it, I had to use the 3v3 from the console board directly on the RPI, I was using the RPI's USB power supply and it didn't...
I also forgot to mention that it is a GD32F103 clone of the STM32F1, this uc is from an 8bitdo control that the analogues that are connected to the analogue...
> * Disconnect everything. > * Run `ls /dev/ttyACM*`. > * Connect pico only. > * Run again `ls /dev/ttyACM*` and check if there's a new ACM port. > It...
> In addition to @deividAlfa 's answer, see if `dmesg` reports anything when you connect the rp2040 board. It may provide a hint as to what's wrong. Excellent idea, I'll...