cpresser
I did a little testing and think that `.` should not be in that list. There is the use-case of things like `3.3V` Perhaps you can write a re that...
I did not do a full review, so just a few points that popped up while looking at the symbol: - [x] The datasheet suggests to put vias into the...
- [ ] Courtyard distance is 0.5mm. It should be 0.25mm - [ ] The Pad-Size seems to be good (0.25*0.475), but none of the positions I checked are okay....
Regarding the courtyard - my bad, I measured from the body outline. Which is wrong. The name originally suggested by me is not good either. Sorry about that. Similar footprints...
I checked at the script and the generated FP. - The Pads are 0.2mm wide. I would expect 0.2 + 0.05 (tolerance) - which is the same as the value...
@evanshultz The change of the lead-witdh to 0.25mm ist most likely a reaction to my previous post. I am still unsure why a lead-with of 0.20mm and tolerance of 0.05mm...
Yes, can do. Currently I am not really active here. Lots of stress with my job. And the hackerspace is closed due to covid. But this is a good opportunity...
Alright, Style-wise I did compare this one to `USB_A_Wuerth_61400826021_Horizontal_Stacked` which is a similar device. The library does have some different - [ ] Pin1 style on F.Fab: I would prefer...
@chmorgan ping. Do you want to continue with this one?
@tpimh please add a link to that datasheet. Are there more manufacturers for those? Please do some research and post your results here. Then we can choose which one we...