Sebastian Balling

That's a really cool feature. :+1: Missed this so much in the past because I always add custom symlinks to my serial ports to get a stable device link. But...

Annex: The duplicated Id is the result of a non-existent serial number on most China devices. This does not normally happen with devices from well-known manufacturers. But these China devices...

+1 This would be very helpful. At the moment I develop a node, that uses the serial connection. Everything I need is in node-red-node-serialport. I still can use this node...

Sehr schön. Genau das, was ich gesucht habe. 👍 Wäre toll, wenn es den Weg in den DEV Branch schafft.

Hello. The block with the visibility codes are only for visibility. The pump marks ununsed parameters with visibility=false. If you want a list with all possible codes, look here: https://github.com/Bouni/Luxtronik-2/blob/master/documentation.md#meaning-of-the-data

You are right. That makes definitly no sense. I've no detailed information about those visibility parameters. If you are unsure, remove those if-clause with the visibility paramter. Instead of `(heatpumpVisibility[167]...

Hello @moritzschrader. This Node-RED node is using the excellent smartmeter-obis module to parse all the data from smartmeters. So the work has to be done at the smartmeter-obis node. Also...

I think then this is the wrong node for you. Perhaps there is a dedicated node for your heat pump.

> ete I didn't get it. Which firmware do i need to get the power consumption? I use firmware 1.x.

Perhaps one of these