콜라맛홍삼

I'm also trying to install games on ZFS and BTRFS for efficient and fast compression than NTFS compression. I am failing to move to btrfs from a btrfs disk. The...

I checked the "Disable resolving of IPv6 addresses" option, and it doesn't seem to cause the problem anymore. But why do I see ipv4 in the logs? Do you think...

I enabled "Disable resolving of IPv6 addresses" and the UDP timeout error was significantly reduced. Before this, the error like "exchanging with 8.8.4.4:53 over udp: read udp 172.26.0.2:42199->8.8.4.4:53: i/o timeout"...

I already disabled it https://github.com/AdguardTeam/AdGuardHome/issues/6714#issuecomment-1932417139 Before I disabled that setting, I was seeing that error log about every 2-3 seconds Now that I've disabled that setting, I'm down to about...

here is the verbose log. thank you. [adguardhome-6b587c4464-8r9db_adguardhome.log](https://github.com/AdguardTeam/AdGuardHome/files/14204388/adguardhome-6b587c4464-8r9db_adguardhome.log)

Unfortunately, I don't have a reverse DNS server registered with AdAds or DNS servers. My AdAds only point to public DNS servers

@rincebrain I had never heard of kASAN before. So I decided to start with what I knew, like memtest86. I'm running a memory test to eliminate the possibility that it's...

@untoldone You're using PVE, too. I have 3 machines too, but the two with the Ryzen 5800G are fine, only the one with the 4750G is the problem. Can you...

> That sounds very similar. So this thread has been open for awhile now; any suggestions on how to make progress? > […](#) > On Tue, Apr 16, 2024 at...

@lucollab I didn't use serve.. Just using tailscale up. Pinging between tailscale servers sometimes results in a time out. At this point, the usage of the tailscale process is close...