Carl McGrath

I agree with Alden, there is no "right" single answer. This will get a newcomer up and running, at least moving and looking at parameter sets. Then they start tweaking...

G2core settings has several ShapeOko Variants. Perhaps migrate settings_cnc3040.h over from tinyG as an example screw machine. I bet we could poll the Ox folks and find a consensus starting...

What file defines " the default gSheild settings" ? I see https://github.com/synthetos/g2/blob/edge/g2core/settings/settings_default.h , That is a weird machine, 1.25 (screw) on X, 40mm(pulley) on Y ?

This comment is about the schematic pdfs: Your "NO" schematic has 10K in series with 100nf. Why is 10K in series? - that reduces the effectiveness of the capacitor substantially....

machadolab: Comments from ewidance above suggest that perhaps 10K and 0.1uf is not adequate port pin filtering for some layouts. Try an experiment with 1uF? It might help, but might...

Sorry Ravi, nothing I can add.

FW 440.20 says you are running tinyG, not G2. Repost at https://synthetos.com/forums/tinyg/tinyg-support or, if you want, https://github.com/synthetos/TinyG/issues

Following this is a dump of significant items to date, by topic Overall, find 3256 better than 3009, particularly with tinyG 412.01. Took me a while to find the relocated...

tgFX.jar build 3009 On linux I see three log files active; error.log, log.out and output.log. All three are being used, but no sign of the results of $$ command to...

Feature request - prepend the output.log file name with date/time stamp, something like 2014-04-23_08.50.13-output.log, so logs are not overwritten in error and self document