Carl McGrath

Thanks, understand. My objective is to produce a Backup up as would be made the old fashion way 1. $$ in Terminal window, scrape the console output and save as...

Nope, Only $1tr and $sa that I have seen reported. Don't have a tinyG with me to test with. On 07/19/2015 10:33 AM, Alden Hart wrote: > OK. I've been...

Looks like perhaps $ma as well is affected. https://groups.google.com/d/msg/chilipeppr/oWrCHzFFUw4/qbXzvvDWafEJ

Here is an avrdude based procedure for Windows users : https://groups.google.com/d/msg/devtinyg/B9xSJaupzNQ/NDOABfAeheIJ

Are you aware of the parameter update issue discussed in (closed) Issue 123? I have seen large variations in the time it takes tinyG to complete an individual parameter update...

If a reset is whtt is required, sending a "CTL-X" should do the jib in software. Better (?) than a relay, but does not really explain the behavior

Coolant toggles with Gcodes M7, M8 and M9. See https://github.com/synthetos/TinyG/wiki/Gcode-Support SDIR toggles with Gcodes M3, M4 (direction) SPIN is toggle With M3/M4 spindle On/Off logic PWM is active based on...

tinyG outputs are unbuffered 3V CMOS logic. Send an M3 command and SPIN lead will toggle to 3V from 0V and PWM will output a PWM pulse stream at selected...

G38.2 is used for auto leveling. Should you be using G28.2 to Home Z using your touch plate? I am not clear what "It just keeps on chugging" means

Give https://github.com/synthetos/TinyG/wiki/Homing-and-Limits-Description-and-Operation a read. Do you have Z min set as home as well as NO (st=0)? Otherwise, it sounds like you are using this process https://github.com/synthetos/TinyG/wiki/Automatic-Z-Homing-When-Milling-PCBs Here is a...