VoronBFI
VoronBFI copied to clipboard
clee
Beefy Front Idlers (for Vorons)
The BZI carrier for the Voron 2.4 is too snug on my 9mm idlers that were used in my stock Z idlers. These were sourced a long time ago so...
One of the overhangs was a bit too steep to print reliably. I cut and chamfered the edges. Not a huge modification mostly for print quality.
While there is a detailed list of additional required parts, there are no instructions on how to build these.
Design allows fools like me to pinch the belt and break parts everywhere on my Micron Plus trying to figure out why my gantry is clicking and binding and moving...
[BFI-VT_Housing_Symmetrical_x2.stl ](https://github.com/clee/VoronBFI/blob/main/usermods/Tetsu/Symetrical%20BFI/STLs/BFI-VT_Housing_Symmetrical_x2.stl) has an M5 and an M3 hole on each side like the V2.4 housing, but the VT housing should have four M5 holes.
In BOM list of BZI for Voron 2.4 you declare 8× M5×40 **S**HCS But looking at images, CAD file and real printed parts, it seems that 8× M5×40 **B**HCS are...
Hi, there is an issue with idler carrier. Belt moves over idler in direction of z+. What may cause this issue. Belt is brand new.
The 5 mm-or-so "ear" on both sides is really needed on one only - note the stock "Z Tensioner Bracket" A and B styles - and in my specific installation...
It seems that during the last commit of file [a]_BZI_V2.4_carrier_x4.stl in the BZI V2.4 folder the wrong file was used. The stl has a large rectangular hole on one side...
