VoronBFI
VoronBFI copied to clipboard
clee
BZI v2.4 Carrier too snug
The BZI carrier for the Voron 2.4 is too snug on my 9mm idlers that were used in my stock Z idlers.
These were sourced a long time ago so this may be a non-issue now. My Idlers are 14.06mm wide and the current carrier printed at 14.09mm. They do fit but are way too snug to move.
I modified the CAD to make one that has a 15mm wide opening for the idler instead of 14mm. The CAD shows the idler is 13mm wide, so I went with 1mm over the size of the idler. I am uploading a ZIP file with the STL and the quickly/crudely done STEP file incase anyone else might need it.
~~I am currently printing this and will validate it works for mine, I will cross this out once I confirm it works for my idlers.~~ They fit just as they should.
Thank you. Same problem here with the idlers that came with my LDO kit.
Did you try the usermod specifically designed for this? https://github.com/clee/VoronBFI/tree/main/usermods/LillianaMirrors/
Did you try the usermod specifically designed for this? https://github.com/clee/VoronBFI/tree/main/usermods/LillianaMirrors/
I didnt see these in the repo at the time. I have been running mine for a while without issue but I dont think we need a duplicate mod here. We can just close this up since it will stay here if its ever needed.