Clayton Barrows

restructure files

3

I plan to improve the file structure of this repo. A proposal for the new structure follows: - src # scripts for tool specific data conversion - data # the...

From @crphilbrick > PROBLEM: Real-time (RT) loads for Area 1 are approximately 140 MW lower than day-ahead (DA) loads in all hours. Also, RT loads show a significant dip at...

From @crphilbrick: > PROBLEM: Steam units have commitment constraints and costs that make it impossible to commit the generator in day ahead (DA) or that cannot be accurately managed in...

From @crphilbrick: >PROBLEM: Gas CTs have significantly worse commitment constraints than oil-fired CTs. > >RESOLUTION: Exchanged commitment data for oil-fired and gas-fired CTs. > >JUSTIFICATION: Gas-fired CTs are more flexible...

Make unit group table

1

Suggestion from Russ Philbrick: make a unit table where consistent parameters across units are collected in a concise table

update start heat values

1

according to this report: https://www.nrel.gov/docs/fy12osti/55433.pdf

Add reserve requirements to RTS.m

1

see page 29 of [this document](http://www.pserc.cornell.edu/matpower/MATPOWER-OPF-slides.pdf)

Also review the other exports for the `HybridSystem`