Christoph Kiefer

WARNING:root:Rate limit reached, backing off...

2

Hi How can this situation be resolved? `WARNING:root:Rate limit reached, backing off...`  BR, Christoph

model: `gpt-4` does not exist

3

Hi Thx for the great work. I am getting the following error in the terminal when pressing the blue "Research" button: `openai.error.InvalidRequestError: The model: `gpt-4` does not exist` My provided...

Hi Thanks for the great work in this repo. I need a little help to install a BTT EEPROM extension module to my BIGTREETECH SKR E3 Turbo board: https://github.com/bigtreetech/BIGTREETECH-SKR-E3-Turbo https://github.com/bigtreetech/BTT-Expansion-module...

EEPROM Datasize Error for BTT E3 Turbo

1

Hi I am using the latest code from anycubic-kad-bugfix-2.0.x to compile the firmware for target anycubic_mega_zero2_btt_e3turbo_bl_e0fan. Without doing any changes to the Marlin code, I am getting this error when...

Strange PSU Click Noise

2

Hello All For some reason whatsoever my PSU makes strange click noises: https://photos.app.goo.gl/tWFLZF5hVtahtbde6 I goes hand in hand with the light on the mainboard that blinks whenever the temperature for...

BLTouch Issue

6

Hello All I downloaded the firmware from branch anycubic-kad-bugfix-2.0.x and applied the following changes to fit my needs: **configuration.h** #define GRID_MAX_POINTS_X 3 #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB -...

Small Pixel Errors on Display

21

Small pixel errors are shown on the display as of release amz_melzi_bed_bl_a2-bugfix-2.0.x-20210311-firmware.hex Printer: Anycubic Mega Zero 2.0 with stock Melzi board, BL Touch attached to exp-a2 connector Some pictures are...