Christian Lamparter
Christian Lamparter
Puuh, this sound like a old problem that I had with the WNDR4700. I remember writing a "linkwatch" userspace program for the WNDR4700's WAN port. It polls swconfig every ~ten~...
> So far I am not able to boot the WASP and even the XHCI renesas controller are giving me some issues. I extracted both needed firmwares from the stock...
Ok, I've been monitoring Matthew Hagan board support going through LKML https://lkml.org/lkml/2021/8/6/947 So v5 has been sitting for like 10 days without new comments cropping up. @clayface, have you heard...
ok, looks like the bcm53xx has added the dts for the MX64(W) + MX65(W) for 5.10: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=bce00f47e5d67e5a33e9d7fa137cbe0a5d3d334b
go for "ssh OpenWrt" or "http://OpenWrt" . The MR24's factory setting was changed by abb4083fa06 to fetch an IP over dhcp instead of statically assigning 192.168.1.1 .
@BKPepe . I don't want to cause another 6006f73383cc7626552175010de23530bdcc8718 situation. though, I get that without NVME support, you can't do much useful stuff with an NVME card in that slot....
Looks like https://github.com/openwrt/openwrt/pull/10337 is packing the nvme support in a kmod.
That ubi0_0_diagnostic1 sha256sum matches. In order to extract the files: # binwalk -e ubi0_0_diagnostic1 # cd _ubi_0_0-diagnostic1.extracted # cpio -i < 5CFFCC (This will extract the diagnostic1 initramfs into the...
>Does anyone know if these partitions are unique or are the partitions identical between all MR33s? (for example does my MR33 have minor changes in the partitions with a serial...