chriswal

? ? ?

try https://github.com/chriswal/OctoPrint-PSUControl/archive/initial_state_config.zip and set the initial state power on option couldnt test it with gpio ..so tell me if it works for you 

what is your sensing configuration?

as the internal state is off at the beginning (off is low in the normal setting and high at the inverted setting) so even if the power supply is on...

you can try my quick fix install the plugin with this url https://github.com/chriswal/OctoPrint-PSUControl/archive/initial_state_config.zip you have to configure the initial power on after restart and your gpio pin as inverted. i...

psucontrol has a state at the beginning .. normal this is off so when we talk about gpio: normal is low is power off high is power on inverted it...

 with a rasperry pi you can have only two states on boot low or high depending on the pins you are using its not possible to leave as it...

so if gpio 27 is low on boot you need psucontrol to be low at start because your power is on, on low ,you need to switch the starting internal...

but that doesnt work with the internal sensing

yes you are right but how you are wiring it (and configure) if you want the power to be on at boot?