Christian

I have the same issue with the WiFi Power Plugs. If I use an unconfigured plug and set it up, it works fine. Once I hold the button for 5...

@Bluebie do you know if there’s a way to manually assign the token rather than using the discovery?

I did some testing with the command line tools in the link you posted and once you reset the device, it can no longer see the token. There is a...

The local API must still work, as the app can still access the aircon locally without going to the cloud. Maybe it was changed to require encryption or some other...

Thanks for that @starryalley. I had a look but the two captures are not enough to reverse engineer the protocol. However it seems that register p_07 is where the key...

Hi, I have an M1 Mac, which allows you to run iOS apps, so I was able to install the Daikin phone app and use tcpdump. Please see my findings...

I also captured the regular handshake of the app. This happens regularly without touching anything on the GUI. Please note: All these transactions happen as part of a single regular...

>  > > I'm hoping this is true, that Daikin is planning to make the cloud API opensource for DIY at the end of this year. Can anyone else...

Another update... I installed [resty](https://github.com/micha/resty) and sent the status request below and was able to get a response from the unit: ```POST /dsiot/multireq '{"requests":[{"op":2,"to":"\/dsiot\/edge.adp_i?filter=pv"},{"op":2,"to":"\/dsiot\/edge.adp_d?filter=pv"},{"op":2,"to":"\/dsiot\/edge.adp_f?filter=pv"},{"op":2,"to":"\/dsiot\/edge.dev_i?filter=pv"},{"op":2,"to":"\/dsiot\/edge\/adr_0100.dgc_status?filter=pv"}]}'``` I can see the temperature set...

> Chrisp250, that is get news,!! > I've installed "Postman" and can send requests too. > What is the message to send to turn on unit? is it a PUT...