choenig

A simple solution would be to just set the `counter` to `refresh` if the image is not visible. This fixes the overflow-issue and makes sure the image is reloaded after...

@fila612: For now you have to publish the setting to `espresense/settings/irk:xxxxx/config` with the payload `{"id":"my_new_id"}` by hand. Don't forget to set the retain flag.

Hi, the beta broke my non SPF-Inverter. I guess the bug is ``` GEN = 0x0001 # base generation for MIC, PV, AC GEN2 = 0x0002 GEN3 = 0x0004 GEN4...

Hi @wills106, Thanks for the fix :) I did not have time to test it again, but the problem was, that it tried to use the SPF-Registers for my SPH,...

Hi, works fine now, thank you so much :) /christian