chimiansw

Results 14 comments of chimiansw

{ "log": { "error": "", "loglevel": "info", "access": "" }, "inbounds": [ { "listen": "127.0.0.1", "protocol": "socks", "settings": { "udp": true, "auth": "noauth" }, "port": "1080" }, { "listen": "127.0.0.1",...

下面是群晖的日志: ``` System Level | Log | Time | User | Event -- | -- | -- | -- | -- Info | System | 2025/09/10 15:20:41 | SYSTEM |...

我是物理机直装的黑群,之前i3+ds920+的时候完全正常,从来没死机过,但是换了sa6400后就总是死机,小白也搞不懂咋回事😭 > 我的虚拟机 ds920+ 前端时间也会突然cpu占满死掉,很频繁。 后面不知道怎么就好了。 也不是很懂,怀疑pve配置其它导致的。总之也不清楚什么问题。不懂这方面。一直都是4u 4mb运行的。最近2个多月再没出现过,算了,能用就行。 > > 另外最近drive 服务直常启动不了, drive office 一直提示损坏需要修复,但drive server 又启动不了。各种卸载重装清数据都没用。改用syncthing同步数据了。。。

另外我还有个问题就是之前用920+的时候,可以通过mount -t vfat /dev/synoboot1 /mnt/boot/来映射磁盘,但是换成SA6400后就不可以了,总是提示:mount: /mnt/boot: wrong fs type, bad option, bad superblock on /dev/synoboot1, missing codepage or helper program, or other error. 这是什么原因造成的?

> 文件系统不是fat32之类的吧 > […](#) 我是用Rufus写入的RR镜像,他应该不会生成其他文件系统吧?就很奇怪

> 再 cmdline 中添加 acpi_enforce_resources=lax 测试 好的,谢谢,我测试看看,目前Cmdline: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 consoleblank=600 split_lock_detect=off netif_num=2 pid=0x557d earlycon=uart8250,io,0x3f8,115200n8 mac2= mac1= sn= modprobe.blacklist=evbug,cdc_ether pcie_aspm=off rootwait nowatchdog vid=0x0781 loglevel=15 HddHotplug=1 skip_vender_mac_interfaces=0,1 panic=5 acpi_enforce_resources=lax vender_format_version=2...

> Warning | System | 2025/09/09 18:04:49 | SYSTEM | System booted up from an improper shutdown. Info | System | 2025/09/09 18:04:09 | SYSTEM | Local UPS was plugged...

不行,在今天早上9点17分死掉了,这个死机会跟docker容器或虚拟机有关系吗?

> 把电源换了 我换过电源,原来是安钛克450w,现在是台达450w/(ㄒoㄒ)/~~

> 再 cmdline 中添加 acpi_enforce_resources=lax 测试 抱歉,这几天通过关闭各种应用测试,发现好像是vmm虚拟机的问题,现在不知道是不是因为mount群晖共享文件夹还是它本身系统有问题,但是这个虚拟机之前在920+好像没造成过死机,具体我真不太会搞了,给各位添麻烦了!