chetan singh rathore

Hello @gabefair, README inside each band folder contains detailed instructions on building the SystemReady Image for that band. ES : https://github.com/ARM-software/arm-systemready/tree/main/ES#acs-build-steps SR: https://github.com/ARM-software/arm-systemready/tree/main/SR#acs-build-steps IR: https://github.com/ARM-software/arm-systemready/blob/main/IR/Yocto/README.md#acs-build-steps Please let us know if...

Hi @NainaMehtaQUIC, Thanks for the logs, based on our analysis the issue seems to be due to some missing drivers related to some devices during the linux boot. Since the...

Hi @NainaMehtaQUIC, If similar issue is seen after enabling all the required drivers for the system, please reopen the ticket. Thanks, Chetan

Hi @NainaMehtaQUIC and @quic-bhaskarv, Thanks for the analysis. We will review the changes proposed and get back asap. Thanks, Chetan

Hi @quic-pansing, We are working on this and will try to provide update by next week. Thanks, Chetan

Hi @quic-pansing and @NainaMehtaQUIC, The changes seems fine, but can you confirm with these changes was the issue observed or not. As the previous comment indicates the issue still persist....

Hi @NainaMehtaQUIC and @quic-pansing, Any updates on above query ?

Hi @quic-pansing and @quic-bhaskarv, I agree that finding if the host is ATA port or not is very tricky, we are trying couple of flags check, same can be tried...

Hi @obbardc and @quic-pansing, We are working on removing the DMA patch dependency during linux boot, the changes are under review and we are planning to close them by this...

Hi @quic-pansing, As mentioned in ticket #402, can you share your observation on bsa linux execution with DT image at this location https://github.com/chetan-rathore/arm-systemready/tree/Images/images/linux_porting cc @NainaMehtaQUIC Thanks, Chetan