charchess

Same here. to be more specific, I got 4 motors and so far : * the X one is working fine * the Y one is dancing (when a command...

@CircuitSetup my issue on the motor was ..I did misread the documentation ... https://github.com/bigtreetech/BIGTREETECH-S42B-V1.0/blob/master/42%20Stepper%20Motor%20Closed%20Loop%20Driver%20Control%20Board%20Manual.pdf page 20 explain how to setup pulse signals ... and it solved the issue of my...

Exact same error message, please advise (and thanks for your excellent work)

Mine is a docker one a "standard" server : Linux ********* 5.3.0-3-amd64 #1 SMP Debian 5.3.15-1 (2019-12-07) x86_64 GNU/Linux Docker version 19.03.4, build 9013bf5 hope it might help

Hi, I had the exact same issue, they made me flash with the ST link and it solved the issue Regards

[M8PV2 How to upate bootloader with ST LINK.docx](https://github.com/bigtreetech/Manta-M8P/files/15063599/M8PV2.How.to.upate.bootloader.with.ST.LINK.docx) Here is the procedure they send me, hope it'll help

Hi, you need 2 resistor terminators, no less, no more. One should be on the motherboard and the other on the other side (EBB) I had issues with that CAN...

Hi, not sure about your issue but I found this about canbus : https://canbus.esoterical.online I was struggling with can, can to bridge and so (EBB42 and M8P) and ...this is...